# Latest **URL:** https://forum.clcboats.com/latest.md [Latest](https://forum.clcboats.com/latest.md) · [Categories](https://forum.clcboats.com/categories.md) · [Tags](https://forum.clcboats.com/tags.md) --- ## [Second layer of fiberglass is visible, uneven](https://forum.clcboats.com/t/second-layer-of-fiberglass-is-visible-uneven/72418)
**Author:** [@David\_Regen](https://forum.clcboats.com/u/David_Regen)\ **Replies:** 5\ **Last updated:** [September 23, 2026, 5:34pm UTC](https://forum.clcboats.com/t/second-layer-of-fiberglass-is-visible-uneven/72418 "2026-09-23T17:34:54Z")
My Petrel strip-built kayak requires a strip of bias-cut fiberglass to join the exterior seam between the deck and the hull, as well as an additional layer of fiberglass on the hull. In some spots, I can see the second l… --- ## [Pocket ship rigging](https://forum.clcboats.com/t/pocket-ship-rigging/72410)
**Author:** [@RichW](https://forum.clcboats.com/u/RichW)\ **Replies:** 2\ **Last updated:** [September 23, 2026, 4:28pm UTC](https://forum.clcboats.com/t/pocket-ship-rigging/72410 "2026-09-23T16:28:29Z")
I’m currently rigging my Pocketship, and I have two questions. First is how to rig the reefing line. This is not mentioned in the instructions. Is it just a mirror image of the outhaul? Would it make any sense to build… --- ## [Started my build SW Dory](https://forum.clcboats.com/t/started-my-build-sw-dory/72014)
**Author:** [@Jon\_Ferguson](https://forum.clcboats.com/u/Jon_Ferguson)\ **Replies:** 205\ **Last updated:** [September 22, 2026, 7:14pm UTC](https://forum.clcboats.com/t/started-my-build-sw-dory/72014 "2026-09-22T19:14:13Z")
Puzzle joints aren’t perfect. I think where I erred is I tightened my thumb bolt knobs too tight, should have relied on the weight of the bucket more. I’m trying that on Plank 1 Port and Starboa… --- ## [19' Cedar Strip CLC Expedition Single Kayak - Mint Condition with Sail](https://forum.clcboats.com/t/19-cedar-strip-clc-expedition-single-kayak-mint-condition-with-sail/72357)
**Author:** [@holeinthewall](https://forum.clcboats.com/u/holeinthewall)\ **Replies:** 4\ **Last updated:** [September 21, 2026, 9:17pm UTC](https://forum.clcboats.com/t/19-cedar-strip-clc-expedition-single-kayak-mint-condition-with-sail/72357 "2026-09-21T21:17:47Z")
Selling an almost new 19’ Cedar Strip CLC Expedition Single home-built kayak as a fundraiser for a kayak club located in Anacortes, WA. Greg Routt, the kayak’s builder/owner sadly passed away after only paddling it for 6… --- ## [Notes of a first time builder…](https://forum.clcboats.com/t/notes-of-a-first-time-builder/72310)
**Author:** [@JedC](https://forum.clcboats.com/u/JedC)\ **Replies:** 5\ **Last updated:** [September 21, 2026, 2:41pm UTC](https://forum.clcboats.com/t/notes-of-a-first-time-builder/72310 "2026-09-21T14:41:01Z")
I post these rather lengthy notes for a likely “I was there many moons ago” snicker from the wise long time builders and maybe an encouragement for those embarking on the voyage for the first time: Timing saves time. A … --- ## [Row boats that are also sailors, do some of you leave the mast and sail rigged as you row?](https://forum.clcboats.com/t/row-boats-that-are-also-sailors-do-some-of-you-leave-the-mast-and-sail-rigged-as-you-row/72407)
**Author:** [@Ray\_Menard](https://forum.clcboats.com/u/Ray_Menard)\ **Replies:** 5\ **Last updated:** [September 21, 2026, 10:49am UTC](https://forum.clcboats.com/t/row-boats-that-are-also-sailors-do-some-of-you-leave-the-mast-and-sail-rigged-as-you-row/72407 "2026-09-21T10:49:09Z")
Hi All, I’m cogitatin’ on a winter build of a row boat that also sails decently. The Lighthouse Tender Pea Pod , the Skerry and the NorthEaster Dory have great appeal though I am leaning harder to the Pea Pod. Perhaps m… --- ## [Sanding epoxy before paint; perfection needed?](https://forum.clcboats.com/t/sanding-epoxy-before-paint-perfection-needed/72399)
**Author:** [@YankeeDoodleDinghy](https://forum.clcboats.com/u/YankeeDoodleDinghy)\ **Replies:** 9\ **Last updated:** [September 21, 2026, 1:15am UTC](https://forum.clcboats.com/t/sanding-epoxy-before-paint-perfection-needed/72399 "2026-09-21T01:15:53Z")
Hi, I’m a first time builder, sander, and painter. I’m working on a Tenderly Dinghy. I have a question about sanding my hull before painting. (My current paint plan: marine primer (unless there are reasons this would be… --- ## [Teardrop + sailboat](https://forum.clcboats.com/t/teardrop-sailboat/72406)
**Author:** [@Patrick\_Caldwell](https://forum.clcboats.com/u/Patrick_Caldwell)\ **Replies:** 2\ **Last updated:** [September 20, 2026, 3:28pm UTC](https://forum.clcboats.com/t/teardrop-sailboat/72406 "2026-09-20T15:28:07Z")
Hi, I’m in the process of deciding between a Passagemaker and Skerry and wonder if anyone has trailer-topped either on CLC’s Teardrop? I’d likely get wider load bars for the roof rack with either. I’m mostly interested i… --- ## [CLC Teardrop w/Integrated Cargo Trailer $9500](https://forum.clcboats.com/t/clc-teardrop-w-integrated-cargo-trailer-9500/72254)
**Author:** [@Long-ezLew666](https://forum.clcboats.com/u/Long-ezLew666)\ **Replies:** 6\ **Last updated:** [September 18, 2026, 6:34pm UTC](https://forum.clcboats.com/t/clc-teardrop-w-integrated-cargo-trailer-9500/72254 "2026-09-18T18:34:11Z")
Pristine Teardrop Trailer built in 2018 at Chesapeake Light Craft (CLC) by owner under CLC supervision and with most factory options. More pictures available. First time offered for sale. Lightly used with trips through… --- ## [Peeler skiff for sale with motor and trailer](https://forum.clcboats.com/t/peeler-skiff-for-sale-with-motor-and-trailer/72226)
**Author:** [@andyhlevine](https://forum.clcboats.com/u/andyhlevine)\ **Replies:** 1\ **Last updated:** [September 17, 2026, 6:36pm UTC](https://forum.clcboats.com/t/peeler-skiff-for-sale-with-motor-and-trailer/72226 "2026-09-17T18:36:38Z")
I have a Peeler skiff for sale with a Mercury 9.9hp motor and a trailer in great condition, barely used…$3000. I am in Newton and Wellfleet MA. email me at andyhlevine@gmail.com --- ## [Speeding up strip built kayak without staples](https://forum.clcboats.com/t/speeding-up-strip-built-kayak-without-staples/72383)
**Author:** [@Steve\_Sawtelle](https://forum.clcboats.com/u/Steve_Sawtelle)\ **Replies:** 13\ **Last updated:** [September 16, 2026, 11:08pm UTC](https://forum.clcboats.com/t/speeding-up-strip-built-kayak-without-staples/72383 "2026-09-16T23:08:46Z")
I prefer to build without staples. I understand they allow one to progress faster since each strip can be solidly held in place while the glue dries. I mostly use tape (3M rough surface) to pull the new strip down tight … --- ## [Using bead as a lip on a strip deck](https://forum.clcboats.com/t/using-bead-as-a-lip-on-a-strip-deck/72396)
**Author:** [@JohnB](https://forum.clcboats.com/u/JohnB)\ **Replies:** 1\ **Last updated:** [September 16, 2026, 10:58pm UTC](https://forum.clcboats.com/t/using-bead-as-a-lip-on-a-strip-deck/72396 "2026-09-16T22:58:15Z")
I’m building a shearwater sport hybrid. When laying out the outside strips I clamped them with the bead hanging over. What are the pros and cons of leaving the bead extending as a lip. I think it looks interesting. --- ## [Custom Marine Paint Colors](https://forum.clcboats.com/t/custom-marine-paint-colors/72185)
**Author:** [@Jon\_Ferguson](https://forum.clcboats.com/u/Jon_Ferguson)\ **Replies:** 10\ **Last updated:** [September 16, 2026, 4:38pm UTC](https://forum.clcboats.com/t/custom-marine-paint-colors/72185 "2026-09-16T16:38:14Z")
Anybody out there mixing marine paint to custom colors? --- ## [SOUTHWESTER DORY balanced lug cat-ketch with motor well and 4hp outboard on trailer for sale in Annapolis, $8,000](https://forum.clcboats.com/t/southwester-dory-balanced-lug-cat-ketch-with-motor-well-and-4hp-outboard-on-trailer-for-sale-in-annapolis-8-000/72236)
**Author:** [@Andrew\_Mackel](https://forum.clcboats.com/u/Andrew_Mackel)\ **Replies:** 1\ **Last updated:** [September 15, 2026, 9:29pm UTC](https://forum.clcboats.com/t/southwester-dory-balanced-lug-cat-ketch-with-motor-well-and-4hp-outboard-on-trailer-for-sale-in-annapolis-8-000/72236 "2026-09-15T21:29:49Z")
SOUTHWESTER DORY balanced lug cat-ketch with motor well and 4hp outboard on trailer for sale in Annapolis, MD. The kit was purchased in November 2019 with first sale in October of 2020. She was trailer sailed on the Mi… --- ## [Outboard motor for PocketShip](https://forum.clcboats.com/t/outboard-motor-for-pocketship/72391)
**Author:** [@PocketShip](https://forum.clcboats.com/u/PocketShip)\ **Replies:** 1\ **Last updated:** [September 15, 2026, 1:38pm UTC](https://forum.clcboats.com/t/outboard-motor-for-pocketship/72391 "2026-09-15T13:38:38Z")
Hi all. I’m planning on fitting a four stroke outboard to my PocketShip. My question is … short or long shaft? I have recently seen a short shaft motor fitted to a PocketShip, which required the lifting mounting bracket… --- ## [Northeast Dory w/Lug Rig](https://forum.clcboats.com/t/northeast-dory-w-lug-rig/72384)
**Author:** [@David\_Worth1](https://forum.clcboats.com/u/David_Worth1)\ **Replies:** 1\ **Last updated:** [September 14, 2026, 9:20pm UTC](https://forum.clcboats.com/t/northeast-dory-w-lug-rig/72384 "2026-09-14T21:20:12Z")
Kit completed in 2022. Comes with one set of oars, the lug rig as shown, stowed in a bag, custom fitted cover with custom bows, riding on a nice clean EZ Loader trailer w/LED lights. 4500$ Located… --- ## [Deck alignment measurements](https://forum.clcboats.com/t/deck-alignment-measurements/72387)
**Author:** [@Robert\_Luke\_Battenfe](https://forum.clcboats.com/u/Robert_Luke_Battenfe)\ **Replies:** 0\ **Last updated:** [September 14, 2026, 5:33pm UTC](https://forum.clcboats.com/t/deck-alignment-measurements/72387 "2026-09-14T17:33:13Z")
I did another dry fit in anticipation to putting the deck on. It looks ok to me. I did have a slight hollow in the foredeck but applying a clamp popped it into compliance. I have marked the center of the fore and aft … --- ## [Hoof rasp - yet another tool](https://forum.clcboats.com/t/hoof-rasp-yet-another-tool/72360)
**Author:** [@Steve\_Sawtelle](https://forum.clcboats.com/u/Steve_Sawtelle)\ **Replies:** 2\ **Last updated:** [September 14, 2026, 12:23am UTC](https://forum.clcboats.com/t/hoof-rasp-yet-another-tool/72360 "2026-09-14T00:23:11Z")
I needed to shape the inner stems on my kayak project. I used my trusty Shinto rasp on one end, then remembered I had bought a horse hoof rasp. I follow Engel’s Coach Shop on YouTube. He restores old horse drawn carriage… --- ## [Solo, Tandem, or Expedition Annapolis Wherry?](https://forum.clcboats.com/t/solo-tandem-or-expedition-annapolis-wherry/72337)
**Author:** [@Crunch](https://forum.clcboats.com/u/Crunch)\ **Replies:** 7\ **Last updated:** [September 13, 2026, 6:47pm UTC](https://forum.clcboats.com/t/solo-tandem-or-expedition-annapolis-wherry/72337 "2026-09-13T18:47:02Z")
Looking for folks who have some experience with one or more of these. I was bent on just making a cedar strip canoe for the longest time but I really prefer a little more speed on the water. Grew up on Hobies and laser… --- ## [Crunch Chester Yawl Build Log](https://forum.clcboats.com/t/crunch-chester-yawl-build-log/72367)
**Author:** [@Crunch](https://forum.clcboats.com/u/Crunch)\ **Replies:** 10\ **Last updated:** [September 12, 2026, 1:23pm UTC](https://forum.clcboats.com/t/crunch-chester-yawl-build-log/72367 "2026-09-12T13:23:50Z")
Alright, this is the first post of many (I hope). Order is in on my first CLC kit and we’ll see how long it goes from order to splash. I am setting a 6 month goal to have it in the water by Spring break (March 27’). I… --- ## [Shear clamps planned too thin?](https://forum.clcboats.com/t/shear-clamps-planned-too-thin/72320)
**Author:** [@Robert\_Luke\_Battenfe](https://forum.clcboats.com/u/Robert_Luke_Battenfe)\ **Replies:** 41\ **Last updated:** [September 12, 2026, 12:28am UTC](https://forum.clcboats.com/t/shear-clamps-planned-too-thin/72320 "2026-09-12T00:28:01Z")
I followed the instructions and used the planning guide for the aft section and I was happy with the results. That was until I looked inside the boat and noticed I planned the shear clamp down to about a 1/4 inch in on… --- ## [Deck centering on bulkhead](https://forum.clcboats.com/t/deck-centering-on-bulkhead/72372)
**Author:** [@Robert\_Luke\_Battenfe](https://forum.clcboats.com/u/Robert_Luke_Battenfe)\ **Replies:** 4\ **Last updated:** [September 11, 2026, 7:55pm UTC](https://forum.clcboats.com/t/deck-centering-on-bulkhead/72372 "2026-09-11T19:55:03Z")
Another day, another question. I am about to put on the decks. In centering the cockpit section do I measure from outside to outside on the deck piece. Or from inside to inside of the cockpit. I have measured from out… --- ## [Shearwater 17 S&G For Sale](https://forum.clcboats.com/t/shearwater-17-s-g-for-sale/72329)
**Author:** [@Dan\_Basham](https://forum.clcboats.com/u/Dan_Basham)\ **Replies:** 3\ **Last updated:** [September 11, 2026, 6:29pm UTC](https://forum.clcboats.com/t/shearwater-17-s-g-for-sale/72329 "2026-09-11T18:29:20Z")
Good condition, minor cosmetic issues. Serious inquiries only. Asking $500.00. Additional contact info: grukken@gmail.com. Call/text @ 443-956-2380. Located in AA County, MD. --- ## [PMD lug rig mast fit](https://forum.clcboats.com/t/pmd-lug-rig-mast-fit/72362)
**Author:** [@Bruce\_Greenwald](https://forum.clcboats.com/u/Bruce_Greenwald)\ **Replies:** 3\ **Last updated:** [September 11, 2026, 2:48am UTC](https://forum.clcboats.com/t/pmd-lug-rig-mast-fit/72362 "2026-09-11T02:48:51Z")
In dry fitting the mast thru the forward seat cutout, mast partner and into the mast step, I find there is a fair amount of play for the mast. Is this normal? My cutout is not quite precise - it could be squared up a … --- ## [Wanted Peeler Skiff](https://forum.clcboats.com/t/wanted-peeler-skiff/72373)
**Author:** [@John\_Barber](https://forum.clcboats.com/u/John_Barber)\ **Replies:** 0\ **Last updated:** [September 10, 2026, 11:37pm UTC](https://forum.clcboats.com/t/wanted-peeler-skiff/72373 "2026-09-10T23:37:01Z")
Looking for Peeler skiff in South East US, No outboard is fine --- ## [Little Auk 10 finished- Lessons Learned](https://forum.clcboats.com/t/little-auk-10-finished-lessons-learned/72101)
**Author:** [@Steve\_Sawtelle](https://forum.clcboats.com/u/Steve_Sawtelle)\ **Replies:** 9\ **Last updated:** [September 9, 2026, 1:05am UTC](https://forum.clcboats.com/t/little-auk-10-finished-lessons-learned/72101 "2026-09-09T01:05:21Z")
I finished my Little Auk 10 today. It’s my 4th CLC build but my first strip plank. I bought it partially built from CLC where it had been used in a class. The hull was decent but I ended up doing a lot of patching on it.… --- ## [Stitching tools](https://forum.clcboats.com/t/stitching-tools/72355)
**Author:** [@Steve\_Sawtelle](https://forum.clcboats.com/u/Steve_Sawtelle)\ **Replies:** 4\ **Last updated:** [September 8, 2026, 7:18pm UTC](https://forum.clcboats.com/t/stitching-tools/72355 "2026-09-08T19:18:59Z")
When I was working on my Wood Duck 10, I was going through tools I inherited from my father. One tool jumped out at me as it looked to be made for stitch and glue. It’s the Bernard No. 102 parallel pliers. They stay alig… --- ## [Faring inside - how good is good enough?](https://forum.clcboats.com/t/faring-inside-how-good-is-good-enough/72353)
**Author:** [@A\_Novis](https://forum.clcboats.com/u/A_Novis)\ **Replies:** 6\ **Last updated:** [September 8, 2026, 12:18am UTC](https://forum.clcboats.com/t/faring-inside-how-good-is-good-enough/72353 "2026-09-08T00:18:46Z")
The outside of my Petrel Play stripper fared up nicely, and the work I put in looks great under a layer of glass. Now comes the inside, and that’s a bit of a pain. I plan on putting effort to get it smooth anywhere my b… --- ## [Upwind sailing a Passagemaker lug rigged dinghy](https://forum.clcboats.com/t/upwind-sailing-a-passagemaker-lug-rigged-dinghy/72350)
**Author:** [@Gareth](https://forum.clcboats.com/u/Gareth)\ **Replies:** 8\ **Last updated:** [September 6, 2026, 9:53pm UTC](https://forum.clcboats.com/t/upwind-sailing-a-passagemaker-lug-rigged-dinghy/72350 "2026-09-06T21:53:22Z")
Does anyone have experience of sailing a Passagemaker lug rigged dinghy upwind? I can’t get mine to point much closer than 90 degrees, so inevitably end up rowing home! I am thinking of changing to gunter rig but not con… --- ## [Cardboard dam for end pours](https://forum.clcboats.com/t/cardboard-dam-for-end-pours/72348)
**Author:** [@Robert\_Luke\_Battenfe](https://forum.clcboats.com/u/Robert_Luke_Battenfe)\ **Replies:** 6\ **Last updated:** [September 6, 2026, 3:45pm UTC](https://forum.clcboats.com/t/cardboard-dam-for-end-pours/72348 "2026-09-06T15:45:21Z")
I completed the end pours using cardboard dams. I covered the inside of the dam with plastic shipping tap. A small leak occurred in the stern which I was able to stem. However the tape is covered in cured epoxy. I ha… [Next page](https://forum.clcboats.com/latest.md?page=1)