# applying vinyl graphics

**URL:** <https://forum.clcboats.com/t/applying-vinyl-graphics/44408>\
**Category:** Builder's Forum\
**Created:** [July 25, 2016, 8:41am UTC](https://forum.clcboats.com/t/applying-vinyl-graphics/44408 "2016-07-25T08:41:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rena\_Debortoli](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@Rena\_Debortoli](https://forum.clcboats.com/u/Rena_Debortoli)\
**Post date:** [July 25, 2016, 8:41am UTC](https://forum.clcboats.com/t/applying-vinyl-graphics/44408/1 "2016-07-25T08:41:07Z")

</div>

I have a 17' CLC Kayak that is ready for varnish/paint. I am going to paint the hull and I want to apply some vinyl graphics that will start from the painted botom, go over the side and end on the deck. Do I varnish first then apply the graphics and varnish over the vinyl? Or do I paint and varnish then apply the vinyl- if I do this how can I protect the vinyl from getting scratched etc.

---

<div class="post-metadata">

**Author:** ![Dick\_Dowdell](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.clcboats.com/dick_dowdell/32/43_2.png) [@Dick\_Dowdell](https://forum.clcboats.com/u/Dick_Dowdell)\
**Post date:** [July 25, 2016, 6:00pm UTC](https://forum.clcboats.com/t/applying-vinyl-graphics/44408/2 "2016-07-25T18:00:16Z")

</div>

Rena,

CLC provides a video to show you how to apply vinyl &nbsp;lettering and graphics ([http://www.clcboats.com/shop/products/boat-building-supplies-epoxy-fiberglass-plywood/vinyl-boat-lettering/custom-vinyl-boat-lettering-graphics-red.html#videos](http://www.clcboats.com/shop/products/boat-building-supplies-epoxy-fiberglass-plywood/vinyl-boat-lettering/custom-vinyl-boat-lettering-graphics-red.html#videos)). &nbsp;I'm reasonably sure they're designed to be applied on top of any paint or varnish. &nbsp;I used the vinyl letting over Brightsides on my boat and it still looks as it did on the day I applied it.

Best of luck,

Dick
