# attaching foam

**URL:** <https://forum.clcboats.com/t/attaching-foam/46194>\
**Category:** Builder's Forum\
**Created:** [May 9, 2018, 5:00pm UTC](https://forum.clcboats.com/t/attaching-foam/46194 "2018-05-09T17:00:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mike\_Bennett1](https://avatars.discourse-cdn.com/v4/letter/m/b3f665/32.png) [@Mike\_Bennett1](https://forum.clcboats.com/u/Mike_Bennett1)\
**Post date:** [May 9, 2018, 5:00pm UTC](https://forum.clcboats.com/t/attaching-foam/46194/1 "2018-05-09T17:00:10Z")

</div>

I used adhesive backed velcro to attache mini closed cell foam to the inside of my kayak cockpit (knee braces). It fell out. I am considering a spray adhesive but am open to any suggestions. &nbsp; Mike

&nbsp;

&nbsp;

&nbsp;

&nbsp;

---

<div class="post-metadata">

**Author:** ![Laszlo\_Morocz](https://avatars.discourse-cdn.com/v4/letter/l/c68b51/32.png) [@Laszlo\_Morocz](https://forum.clcboats.com/u/Laszlo_Morocz)\
**Post date:** [May 9, 2018, 8:27pm UTC](https://forum.clcboats.com/t/attaching-foam/46194/2 "2018-05-09T20:27:05Z")

</div>

I used brush-on contact cement. The foam failed before the joint did.

Laszlo

&nbsp;

---

<div class="post-metadata">

**Author:** ![Mike\_Bennett1](https://avatars.discourse-cdn.com/v4/letter/m/b3f665/32.png) [@Mike\_Bennett1](https://forum.clcboats.com/u/Mike_Bennett1)\
**Post date:** [May 9, 2018, 11:33pm UTC](https://forum.clcboats.com/t/attaching-foam/46194/3 "2018-05-09T23:33:33Z")

</div>

Thanks Laszlo

Mike &nbsp;