# Aussie Skerry Build 2020

**URL:** <https://forum.clcboats.com/t/aussie-skerry-build-2020/47684>\
**Category:** Builder's Forum\
**Created:** [May 19, 2020, 6:36am UTC](https://forum.clcboats.com/t/aussie-skerry-build-2020/47684 "2020-05-19T06:36:49Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rod\_Otzen](https://avatars.discourse-cdn.com/v4/letter/r/bc8723/32.png) [@Rod\_Otzen](https://forum.clcboats.com/u/Rod_Otzen)\
**Post date:** [May 19, 2020, 6:36am UTC](https://forum.clcboats.com/t/aussie-skerry-build-2020/47684/1 "2020-05-19T06:36:49Z")

</div>

G’day fellow shipmates.  
Over here in West Oz, I bought the plans for the Skerry about 12 months ago,then bought a house in need of renovating. Now the major Reno’s are done, and after years of wanting and one false start with a Sabre, it’s Skerry time.  
A bit about me…  
50 this October, dinghy and keel boat experience but off the water for a few decades now.  
Got myself some 6mm and 10mm Okume ply, and today a 4 meter length of 50 X 200 Oregon. Enough to make a start.  
I’m sure there have been plenty of Skerry build threads, I’m not here to teach anyone, quite the opposite l have learnt quite a lot reading these pages.  
Would you believe l can get two sailrite lug rig kits for the same price as a made sail in Aust.  
So here’s my wood and here is me, once ok figure out how to post pics.  
I’ll post updates as l go.  
Cheers, Rod.

---

<div class="post-metadata">

**Author:** ![Rod\_Otzen](https://avatars.discourse-cdn.com/v4/letter/r/bc8723/32.png) [@Rod\_Otzen](https://forum.clcboats.com/u/Rod_Otzen)\
**Post date:** [May 19, 2020, 6:51am UTC](https://forum.clcboats.com/t/aussie-skerry-build-2020/47684/2 "2020-05-19T06:51:07Z")

</div>

[https://photos.app.goo.gl/rKtwJ2W4vyrQTN9CA](https://photos.app.goo.gl/rKtwJ2W4vyrQTN9CA)

---

<div class="post-metadata">

**Author:** ![Rod\_Otzen](https://avatars.discourse-cdn.com/v4/letter/r/bc8723/32.png) [@Rod\_Otzen](https://forum.clcboats.com/u/Rod_Otzen)\
**Post date:** [May 19, 2020, 10:35am UTC](https://forum.clcboats.com/t/aussie-skerry-build-2020/47684/3 "2020-05-19T10:35:43Z")

</div>

[https://photos.app.goo.gl/sQFgNUsurzwGHede9](https://photos.app.goo.gl/sQFgNUsurzwGHede9)
