# Brisbane Marine ply

**URL:** <https://forum.clcboats.com/t/brisbane-marine-ply/38582>\
**Category:** Builder's Forum\
**Created:** [June 15, 2011, 12:10am UTC](https://forum.clcboats.com/t/brisbane-marine-ply/38582 "2011-06-15T00:10:15Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Craig\_Robinson](https://avatars.discourse-cdn.com/v4/letter/c/46a35a/32.png) [@Craig\_Robinson](https://forum.clcboats.com/u/Craig_Robinson)\
**Post date:** [June 15, 2011, 12:10am UTC](https://forum.clcboats.com/t/brisbane-marine-ply/38582/1 "2011-06-15T00:10:15Z")

</div>

G'Day All,   
Can anybody in Brisbane point me in the direction of some marine ply in Bris?   
plyandpanel at Darra couldn't help   
Boatcraft pacific in Logan have it at $55-60 per sheet.

Any other sources out there cheaper than Boatcraft?

---

<div class="post-metadata">

**Author:** ![Bob\_Phillips](https://avatars.discourse-cdn.com/v4/letter/b/f6c823/32.png) [@Bob\_Phillips](https://forum.clcboats.com/u/Bob_Phillips)\
**Post date:** [June 15, 2011, 4:57am UTC](https://forum.clcboats.com/t/brisbane-marine-ply/38582/2 "2011-06-15T04:57:27Z")

</div>

I was going to suggest boatcraft.

You missed out on a great special about 2 months ago - they had all their ply at 50% off!

&nbsp;

---

<div class="post-metadata">

**Author:** ![David\_Grimshaw](https://avatars.discourse-cdn.com/v4/letter/d/ccd318/32.png) [@David\_Grimshaw](https://forum.clcboats.com/u/David_Grimshaw)\
**Post date:** [June 18, 2011, 6:33am UTC](https://forum.clcboats.com/t/brisbane-marine-ply/38582/3 "2011-06-18T06:33:38Z")

</div>

Gidday Craig.

I bought my ply from anther company than Boat Craft at Logan.&nbsp; But I did buy my deck ply from them and my epoxy resin and my stringers (which I think were oak).&nbsp; I built my Chesapeake 17 some ten years ago and therefore cannot recall where I bought my ply from.&nbsp; The problem with the cheap ply I bought was that it did not have even core compared to the two veneer layers of ply.&nbsp; I probably did not do a good scarf join because one of the bulkheads broke when bending into position and i had to but-join it where it broke.&nbsp; I think you are really supposed to get ply with even veneers for strength and bend-a-bility.&nbsp; If you bend the uneven veneers of ply for a deck (where you have to r e a l l y bend the ply) you may get cracks.&nbsp; Anyway, I am really trying to sell you the ply they sell at logan even though it is dearer.&nbsp; I can give you a company that sells cheap ply but I need the information from a mates father who builds Arrow catamarans for people as a retirement project.&nbsp; The veneers of this ply are uneven and the feedback I get from these cats he builds is that they flex -- although you won't be doing ten to fifteen knots in a kayak and mine is strong (but I double taped the keel).&nbsp; Give me a text on 0418 443 081 and I'll find out where the cheap ply is available from.

---

<div class="post-metadata">

**Author:** ![Craig\_Robinson](https://avatars.discourse-cdn.com/v4/letter/c/46a35a/32.png) [@Craig\_Robinson](https://forum.clcboats.com/u/Craig_Robinson)\
**Post date:** [June 19, 2011, 9:32pm UTC](https://forum.clcboats.com/t/brisbane-marine-ply/38582/4 "2011-06-19T21:32:53Z")

</div>

Thanks for replies. I was speaking to a bloke the other day and he was quoted almost $50 for seconds from Boral, so that makes the Boatcraft prices look good. i have bought from Boatcraft before and have found their products and service to be great.

I'm gearing up for a very lightweight build, so quality will be critical. off to Loganholme it is.

Cheers

&nbsp;
