# epoxying layers of foam

**URL:** <https://forum.clcboats.com/t/epoxying-layers-of-foam/37225>\
**Category:** Builder's Forum\
**Created:** [June 28, 2010, 8:30pm UTC](https://forum.clcboats.com/t/epoxying-layers-of-foam/37225 "2010-06-28T20:30:43Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ben\_Steinberg](https://avatars.discourse-cdn.com/v4/letter/b/71c47a/32.png) [@Ben\_Steinberg](https://forum.clcboats.com/u/Ben_Steinberg)\
**Post date:** [June 28, 2010, 8:30pm UTC](https://forum.clcboats.com/t/epoxying-layers-of-foam/37225/1 "2010-06-28T20:30:43Z")

</div>

Hi all --

I'm nearing completion of a Northeaster Dory, and have cut a bunch of 1-1/2" thick Foamular into 6" strips for flotation blocks.&nbsp; Next step is to epoxy three layers together -- I had assumed I'd coat the adjoining surfaces of the strips with thickened epoxy, but it now strikes me that that will be a ton of epoxy.&nbsp; Does anyone have any comment on using spots or lines of epoxy to tack the layers together?&nbsp; The outer surface of each block will be entirely coated with epoxy.

Thanks!

Ben