# Getting started Chesapeake 17!

**URL:** <https://forum.clcboats.com/t/getting-started-chesapeake-17/39200>\
**Category:** Builder's Forum\
**Created:** [January 6, 2012, 10:00pm UTC](https://forum.clcboats.com/t/getting-started-chesapeake-17/39200 "2012-01-06T22:00:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jps](https://avatars.discourse-cdn.com/v4/letter/j/b4bc9f/32.png) [@jps](https://forum.clcboats.com/u/jps)\
**Post date:** [January 6, 2012, 10:00pm UTC](https://forum.clcboats.com/t/getting-started-chesapeake-17/39200/1 "2012-01-06T22:00:02Z")

</div>

Okay 2 questions:

1. How tight should the puzzle joints be? They are snug a bit large with a dry fit. I almost think I'll need to tap with a rubber mallet in the current state. Afraid that the plywood edges may fray and mar the finish if I force it.

2. The Hull panel pieces are different tones. Will this still be the case with a bright finish? Not sure I would like the finish if it stays different and would then consider painting or staining the hull. (The deck will be stripped)

---

<div class="post-metadata">

**Author:** ![Henry\_Wing](https://avatars.discourse-cdn.com/v4/letter/h/bbce88/32.png) [@Henry\_Wing](https://forum.clcboats.com/u/Henry_Wing)\
**Post date:** [January 6, 2012, 11:19pm UTC](https://forum.clcboats.com/t/getting-started-chesapeake-17/39200/2 "2012-01-06T23:19:28Z")

</div>

I'm not sure about your color issues but would try some very fine grit sanding to see if that affects the color.&nbsp; As for the puzzle joints, the silica/epixy mixture will act somewhat as a lubrecant when you put them together.
