# How much is enough

**URL:** <https://forum.clcboats.com/t/how-much-is-enough/38268>\
**Category:** Builder's Forum\
**Created:** [March 28, 2011, 4:52pm UTC](https://forum.clcboats.com/t/how-much-is-enough/38268 "2011-03-28T16:52:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ross\_Price](https://avatars.discourse-cdn.com/v4/letter/r/90ced4/32.png) [@Ross\_Price](https://forum.clcboats.com/u/Ross_Price)\
**Post date:** [March 28, 2011, 4:52pm UTC](https://forum.clcboats.com/t/how-much-is-enough/38268/1 "2011-03-28T16:52:23Z")

</div>

I’m building a wood duck 10. I just went out and bought some west 105/207 resin. Only problem is west is 3:1 and that means that I have 1 1/3 gallons of resin. I see that CLC sells a MAS 1 1/2 gallon kit with the WD10. Anyone out there built a WD10 and had left over resin from the MAS kit.

---

<div class="post-metadata">

**Author:** ![Chris\_Atwood](https://avatars.discourse-cdn.com/v4/letter/c/b77776/32.png) [@Chris\_Atwood](https://forum.clcboats.com/u/Chris_Atwood)\
**Post date:** [March 28, 2011, 5:52pm UTC](https://forum.clcboats.com/t/how-much-is-enough/38268/2 "2011-03-28T17:52:34Z")

</div>

For my WD10 the MAS in the kit was just enough.&nbsp; Not a drop left.&nbsp;

---

<div class="post-metadata">

**Author:** ![Grant\_Carlson](https://avatars.discourse-cdn.com/v4/letter/g/6bbea6/32.png) [@Grant\_Carlson](https://forum.clcboats.com/u/Grant_Carlson)\
**Post date:** [March 29, 2011, 1:46am UTC](https://forum.clcboats.com/t/how-much-is-enough/38268/3 "2011-03-29T01:46:34Z")

</div>

On the other hand ... I built a couple Chesapeake LT's, was reasonably careful about waste, and had lots of epoxy left from the MAS epoxy kits. I'd say get started on the build, because what you have already have might be all you need.

Grant