# interlux flattening agent

**URL:** <https://forum.clcboats.com/t/interlux-flattening-agent/43128>\
**Category:** Builder's Forum\
**Created:** [June 7, 2015, 5:40pm UTC](https://forum.clcboats.com/t/interlux-flattening-agent/43128 "2015-06-07T17:40:25Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ken\_Klitzman](https://avatars.discourse-cdn.com/v4/letter/k/85e7bf/32.png) [@Ken\_Klitzman](https://forum.clcboats.com/u/Ken_Klitzman)\
**Post date:** [June 7, 2015, 5:40pm UTC](https://forum.clcboats.com/t/interlux-flattening-agent/43128/1 "2015-06-07T17:40:25Z")

</div>

Has anyone used Interlux flattening agent with Brightside 1-part poly paint? After 2 coats of glossy Brightside on my Peeler, I'm not pleased with the results. I've spent hours sanding in preperation&nbsp;before and&nbsp;after the Prekote primer.EVERYTHING shows!!!! Every ding and run or pinhole stands out. I thought maybe a satin finish would help the situation. Are there any negatives adding the flattening agent? I've done alot of painting in my time and I think I could do better with a good paint brush. All of the rails and other corners add to the problem with the roller.&nbsp; Thanks in advance, Ken.

---

<div class="post-metadata">

**Author:** ![Ken\_Klitzman](https://avatars.discourse-cdn.com/v4/letter/k/85e7bf/32.png) [@Ken\_Klitzman](https://forum.clcboats.com/u/Ken_Klitzman)\
**Post date:** [June 7, 2015, 5:52pm UTC](https://forum.clcboats.com/t/interlux-flattening-agent/43128/2 "2015-06-07T17:52:57Z")

</div>

I forgot to mention, I'm in the process of painting the outside of the hull (dark blue).&nbsp;&nbsp;&nbsp;Thanks, Ken.

---

<div class="post-metadata">

**Author:** ![Dick\_Dowdell](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.clcboats.com/dick_dowdell/32/43_2.png) [@Dick\_Dowdell](https://forum.clcboats.com/u/Dick_Dowdell)\
**Post date:** [June 8, 2015, 7:47am UTC](https://forum.clcboats.com/t/interlux-flattening-agent/43128/3 "2015-06-08T07:47:08Z")

</div>

Klitz,

I'm not sure that a flattening agent will solve your problem, but here's the link to the advice Jacardan2 mentioned: &nbsp;[http://www.clcboats.com/forum/clcforum/thread/31062.html](http://www.clcboats.com/forum/clcforum/thread/31062.html).

Dark colors tend to show imperfections more than lighter colors. &nbsp;I used a combination of a Bondo-like marine filler putty and Interlux Pre-Kote high-build primer to prep the surface before applying the Interlux Brightsides. &nbsp;I pretty much followed the advice in the CLC Tips for Boatbuilders on [Painting with Marine Polyurethanes](http://www.clcboats.com/shoptips/finishing-tips/painting_polyurethanes.html)&nbsp;and I was very satisfied with the results. &nbsp;Some important points about Pre-Kote:

1. Apply it only in dry weather,
2. Sand most of it off --- its job is to fill imperfections --- Brightsides sticks to epoxy just fine without it,
3. Get the Brightsides on it before the weather turns damp.

Hope this helps,

Dick

---

<div class="post-metadata">

**Author:** ![Jeff\_Doubrava1](https://avatars.discourse-cdn.com/v4/letter/j/87869e/32.png) [@Jeff\_Doubrava1](https://forum.clcboats.com/u/Jeff_Doubrava1)\
**Post date:** [June 8, 2015, 11:04am UTC](https://forum.clcboats.com/t/interlux-flattening-agent/43128/4 "2015-06-08T11:04:06Z")

</div>

I have used the flattening agrent with good success. &nbsp;The only downside as noted above is that it thins the paint considerablly requiring more coats to cover. I will be doing this on the inside of my Peeler and plan to apply an initial coat as received with only the second coat with the added flattening compound.
