# Kaholo 14 fillet ?

**URL:** <https://forum.clcboats.com/t/kaholo-14-fillet/41486>\
**Category:** Builder's Forum\
**Created:** [October 20, 2013, 10:36pm UTC](https://forum.clcboats.com/t/kaholo-14-fillet/41486 "2013-10-20T22:36:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nick\_Seemel](https://avatars.discourse-cdn.com/v4/letter/n/13edae/32.png) [@Nick\_Seemel](https://forum.clcboats.com/u/Nick_Seemel)\
**Post date:** [October 20, 2013, 10:36pm UTC](https://forum.clcboats.com/t/kaholo-14-fillet/41486/1 "2013-10-20T22:36:45Z")

</div>

I am plan (no kit) building a 14 in Nova Scotia. &nbsp;Just tacked the hull. Next step is fillet. Do I fillet both sides of the bulkheads? Seems like weight saving would say one side is adequate...

thanks

---

<div class="post-metadata">

**Author:** ![George\_Krewson](https://avatars.discourse-cdn.com/v4/letter/g/9d8465/32.png) [@George\_Krewson](https://forum.clcboats.com/u/George_Krewson)\
**Post date:** [October 21, 2013, 9:25am UTC](https://forum.clcboats.com/t/kaholo-14-fillet/41486/2 "2013-10-21T09:25:50Z")

</div>

A small fillet on both sides adds just a few ounces of weight. What you really have to watch is epoxy pooling in the bottom of the hull when you seal the inside.

George K