# Mas Epoxy

**URL:** <https://forum.clcboats.com/t/mas-epoxy/36102>\
**Category:** Builder's Forum\
**Created:** [December 5, 2009, 7:31pm UTC](https://forum.clcboats.com/t/mas-epoxy/36102 "2009-12-05T19:31:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gregg\_Runkel](https://avatars.discourse-cdn.com/v4/letter/g/7ab992/32.png) [@Gregg\_Runkel](https://forum.clcboats.com/u/Gregg_Runkel)\
**Post date:** [December 5, 2009, 7:31pm UTC](https://forum.clcboats.com/t/mas-epoxy/36102/1 "2009-12-05T19:31:02Z")

</div>

&nbsp;

&nbsp; I was thinking about using&nbsp; Mas low viscosity resin to wet out the fiberlass & then switching over to the Mas&nbsp;Flag resin to fill the weave & also for glueing & filleting.&nbsp; Anybody have any thoughts about this, is it worth&nbsp;while to buy the two different resins?&nbsp; I was thinking it might save a little time since I'm building 2 kayaks at the same time.

&nbsp;&nbsp; Gregg

---

<div class="post-metadata">

**Author:** ![Allen\_Hamm](https://avatars.discourse-cdn.com/v4/letter/a/8797f3/32.png) [@Allen\_Hamm](https://forum.clcboats.com/u/Allen_Hamm)\
**Post date:** [December 6, 2009, 9:10am UTC](https://forum.clcboats.com/t/mas-epoxy/36102/2 "2009-12-06T09:10:40Z")

</div>

The Flag resin is thicker and is more suited for glueing and filleting. I wouldn’t use it for filling the weave.