# Northeaster Dory Final Sanding

**URL:** <https://forum.clcboats.com/t/northeaster-dory-final-sanding/43224>\
**Category:** Builder's Forum\
**Created:** [July 16, 2015, 5:09pm UTC](https://forum.clcboats.com/t/northeaster-dory-final-sanding/43224 "2015-07-16T17:09:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![David\_Peterson2](https://avatars.discourse-cdn.com/v4/letter/d/9f8e36/32.png) [@David\_Peterson2](https://forum.clcboats.com/u/David_Peterson2)\
**Post date:** [July 16, 2015, 5:09pm UTC](https://forum.clcboats.com/t/northeaster-dory-final-sanding/43224/1 "2015-07-16T17:09:31Z")

</div>

I am in the final stages of sanding the interior of my Northeaster and will soon (finally) be varnishing. &nbsp;There are a few small spots where the epoxy coat was apparently thinner and I have sanded through to bare wood.

I plan to mask around those areas and roll on a thin layer of epoxy and resand. &nbsp;Any advice? Will one coat do it or should I put two on to start with?

Thanks in advance for any advice.

&nbsp;

---

<div class="post-metadata">

**Author:** ![Laszlo\_Morocz](https://avatars.discourse-cdn.com/v4/letter/l/c68b51/32.png) [@Laszlo\_Morocz](https://forum.clcboats.com/u/Laszlo_Morocz)\
**Post date:** [July 16, 2015, 5:54pm UTC](https://forum.clcboats.com/t/northeaster-dory-final-sanding/43224/2 "2015-07-16T17:54:23Z")

</div>

If it was my boat I'd do 3 thin layers.

Laszlo

&nbsp;

---

<div class="post-metadata">

**Author:** ![David\_Peterson2](https://avatars.discourse-cdn.com/v4/letter/d/9f8e36/32.png) [@David\_Peterson2](https://forum.clcboats.com/u/David_Peterson2)\
**Post date:** [July 16, 2015, 10:31pm UTC](https://forum.clcboats.com/t/northeaster-dory-final-sanding/43224/3 "2015-07-16T22:31:12Z")

</div>

&nbsp; &nbsp;Thanks Lazlo- will do.