# Passagemaker - bulkhead fit

**URL:** <https://forum.clcboats.com/t/passagemaker-bulkhead-fit/48794>\
**Category:** Builder's Forum\
**Created:** [June 21, 2021, 11:10pm UTC](https://forum.clcboats.com/t/passagemaker-bulkhead-fit/48794 "2021-06-21T23:10:06Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bruce\_Greenwald](https://avatars.discourse-cdn.com/v4/letter/b/a87d85/32.png) [@Bruce\_Greenwald](https://forum.clcboats.com/u/Bruce_Greenwald)\
**Post date:** [June 21, 2021, 11:10pm UTC](https://forum.clcboats.com/t/passagemaker-bulkhead-fit/48794/1 "2021-06-21T23:10:06Z")

</div>

With the happy help of a few of my grandchildren I fairly quickly stitched together the port and starboard #1 and #2 hull panels. &nbsp;Only then did I discover that the stitching was apparently way too tight to accommodate the forward and aft bulkheads. &nbsp;I am now I. The process of loosening &nbsp;the stitches and trying to shape the angles of the hull panels to the bottom and sides of the bulkheads. &nbsp;It is proving to be a long and frustrating process with a lot of trial and error and I'm wondering if there are any tricks in getting this step accomplished?