# Passagemaker - Damaged Gaff/Yard on Gunter Rig

**URL:** https://forum.clcboats.com/t/passagemaker-damaged-gaff-yard-on-gunter-rig/72032
**Category:** Builder's Forum
**Created:** [April 29, 2026, 12:07am UTC](https://forum.clcboats.com/t/passagemaker-damaged-gaff-yard-on-gunter-rig/72032 "2026-04-29T00:07:52Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![RCSailin](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@RCSailin](https://forum.clcboats.com/u/RCSailin)
#### Post date: [April 29, 2026, 12:07am UTC](https://forum.clcboats.com/t/passagemaker-damaged-gaff-yard-on-gunter-rig/72032/1 "2026-04-29T00:07:52Z")

</div>

I recently got a CLC Passagemaker that was built around 2009-2010. Still in good shape. Really just needs some fluff & buff except for one major issue. The base of the gaff/yard, the ‘Y’ portion that rests against the upper mast, is broken off on 1 side. Not sure if this is fixable, or if I need to look into a whole new gaff/yard. Anybody dealt with similar situation or have any ideas. Thanks. Richard

---

<div class="post-metadata">

### Author: ![Steve\_Sawtelle](https://avatars.discourse-cdn.com/v4/letter/s/edb3f5/32.png) [@Steve\_Sawtelle](https://forum.clcboats.com/u/Steve_Sawtelle)
#### Post date: [April 29, 2026, 1:50pm UTC](https://forum.clcboats.com/t/passagemaker-damaged-gaff-yard-on-gunter-rig/72032/2 "2026-04-29T13:50:01Z")

</div>

If it’s a clean break, I would think you could glue it together with Titebond 3. Maybe drill a couple of small holes and insert dowels also. If the two pieces don’t fit well together, epoxy could work.

---

<div class="post-metadata">

### Author: ![RCSailin](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@RCSailin](https://forum.clcboats.com/u/RCSailin)
#### Post date: [April 29, 2026, 2:17pm UTC](https://forum.clcboats.com/t/passagemaker-damaged-gaff-yard-on-gunter-rig/72032/3 "2026-04-29T14:17:14Z")

</div>

Steve,

Appreciate the feedback. Good ideas. Biggest problem is it wasn’t a ‘clean’ break, and the broken off piece is lost somewhere in history. Thinking I may have to create a new ‘piece’ and try

to graft it on, or abandon the repair and maybe go with some sort of strap to hold it against the mast. My little brain is still sorting thru the pros & cons……….. Stay tuned.

---

<div class="post-metadata">

### Author: ![Jon\_Ferguson](https://avatars.discourse-cdn.com/v4/letter/j/d9b06d/32.png) [@Jon\_Ferguson](https://forum.clcboats.com/u/Jon_Ferguson)
#### Post date: [April 29, 2026, 5:09pm UTC](https://forum.clcboats.com/t/passagemaker-damaged-gaff-yard-on-gunter-rig/72032/4 "2026-04-29T17:09:02Z")

</div>

A photo of the broken piece would help Richard.
