# Peeler skiff flotation question

**URL:** <https://forum.clcboats.com/t/peeler-skiff-flotation-question/41585>\
**Category:** Builder's Forum\
**Created:** [November 19, 2013, 11:31pm UTC](https://forum.clcboats.com/t/peeler-skiff-flotation-question/41585 "2013-11-19T23:31:06Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![Chad\_Eiben](https://avatars.discourse-cdn.com/v4/letter/c/3da27b/32.png) [@Chad\_Eiben](https://forum.clcboats.com/u/Chad_Eiben)\
**Post date:** [November 19, 2013, 11:31pm UTC](https://forum.clcboats.com/t/peeler-skiff-flotation-question/41585/1 "2013-11-19T23:31:06Z")

</div>

Hello. I have a question about the peeler skiff's flotation. &nbsp;I am ready to order the peeler kit but am concerned with the lack of storage areas. &nbsp;Can some of the flotation cavities be cut open to create storage areas? &nbsp;Maybe even section off some of them and fill with foam and use the othe section for storage? &nbsp;Just trying to think ahead. &nbsp;With life jackets, cooler, rods, wife, kid, etc.....just trying to decide what to do. &nbsp;Thanks all!

Chad

---

<div class="post-metadata">

**Author:** ![Bill\_Caldwell1](https://avatars.discourse-cdn.com/v4/letter/b/a9adbd/32.png) [@Bill\_Caldwell1](https://forum.clcboats.com/u/Bill_Caldwell1)\
**Post date:** [November 20, 2013, 9:54am UTC](https://forum.clcboats.com/t/peeler-skiff-flotation-question/41585/2 "2013-11-20T09:54:01Z")

</div>

I put three hatches in.&nbsp; In both aft flotation tanks.&nbsp; As far forward as possible where I can store 8"x 10" tackle boxes.&nbsp; I also put a hatch in the bow bulkhead for storage and inspection.&nbsp; I reinforced the bulkhead and also added another half bulkhead for strength farther forward and added sealed tubes for rod storage.&nbsp; I have foam on the floor and up under the seat in the bow "locker".&nbsp; The design calls for full flotation in all areas though.&nbsp; If my boat breaks open it will still have plenty of flotation from the life jackets in stowage, a cooler, seat cushions, fenders, etc.&nbsp; Not worried at all.&nbsp; I guess the worst case scenario would be flooding the motor.&nbsp; Where are you building your Peeler?

&nbsp;

---

<div class="post-metadata">

**Author:** ![Ken\_Klitzman](https://avatars.discourse-cdn.com/v4/letter/k/85e7bf/32.png) [@Ken\_Klitzman](https://forum.clcboats.com/u/Ken_Klitzman)\
**Post date:** [November 20, 2013, 10:02am UTC](https://forum.clcboats.com/t/peeler-skiff-flotation-question/41585/3 "2013-11-20T10:02:47Z")

</div>

I know of at least 3 Peelers already built or in the process that utilize some of the flotation areas for storage. I've just started a Peeler and plan to have a small storage&nbsp;area under the front seat as well as port and starboard cut out of the side tanks. The hatches must be waterproof so the boat&nbsp;flotation is&nbsp;retained. The hatch openings are also beneficial to airing out the flotation areas when not using the boat.&nbsp;Whatever foam you don't use deducts from the total positive flotation the boat has. I'm not going real big with mine, maybe&nbsp; 12" x 12" cubes.

I think I will use some of the space under the thwart for larger storage, maybe box it in.&nbsp; Good luck! Ken.

---

<div class="post-metadata">

**Author:** ![Robert\_Meyer](https://avatars.discourse-cdn.com/v4/letter/r/7feea3/32.png) [@Robert\_Meyer](https://forum.clcboats.com/u/Robert_Meyer)\
**Post date:** [November 20, 2013, 10:31am UTC](https://forum.clcboats.com/t/peeler-skiff-flotation-question/41585/4 "2013-11-20T10:31:20Z")

</div>

![](https://lh4.googleusercontent.com/-eIdLU-hUzhc/UozNUnMpqzI/AAAAAAAABEo/wNJT13k-vPk/s640/seat%2520storage.jpg)

&nbsp;

I left a small area at the front of the side seats open behind a waterproof hatch to store small items in. If you totally fill areas with foam I would still install a round inspection plate to allow airing out if water gets in.

---

<div class="post-metadata">

**Author:** ![Bill\_Caldwell1](https://avatars.discourse-cdn.com/v4/letter/b/a9adbd/32.png) [@Bill\_Caldwell1](https://forum.clcboats.com/u/Bill_Caldwell1)\
**Post date:** [November 20, 2013, 1:02pm UTC](https://forum.clcboats.com/t/peeler-skiff-flotation-question/41585/5 "2013-11-20T13:02:11Z")

</div>

I will temporarily fill my storage compartments&nbsp;with foam pieces for the Marine Police inspection to get my title and numbers.&nbsp; LOL!&nbsp;

---

<div class="post-metadata">

**Author:** ![Ken\_Klitzman](https://avatars.discourse-cdn.com/v4/letter/k/85e7bf/32.png) [@Ken\_Klitzman](https://forum.clcboats.com/u/Ken_Klitzman)\
**Post date:** [November 20, 2013, 1:35pm UTC](https://forum.clcboats.com/t/peeler-skiff-flotation-question/41585/6 "2013-11-20T13:35:26Z")

</div>

I'm &nbsp;in Wisconsin and I just called the DNR who does the registration. They don't need to see the boat and only need description details. My Peeler kit came with a sticker for the transom which will help too. If the boat in Wisconsin is under 16ft, there is no title just a number. So it looks pretty easy in this state.

---

<div class="post-metadata">

**Author:** ![Bill\_Caldwell1](https://avatars.discourse-cdn.com/v4/letter/b/a9adbd/32.png) [@Bill\_Caldwell1](https://forum.clcboats.com/u/Bill_Caldwell1)\
**Post date:** [November 20, 2013, 2:42pm UTC](https://forum.clcboats.com/t/peeler-skiff-flotation-question/41585/7 "2013-11-20T14:42:00Z")

</div>

Thats NJ for ya!&nbsp; Everybody wants more money and have a say in everything!&nbsp; We need a safe boating licence too.&nbsp; It costs like $100 for the course.&nbsp; I'm thinking it will be the highlight of the Marine Police's day&nbsp;when they see and inspect&nbsp;the Peeler!&nbsp;

&nbsp;

---

<div class="post-metadata">

**Author:** ![Ken\_Klitzman](https://avatars.discourse-cdn.com/v4/letter/k/85e7bf/32.png) [@Ken\_Klitzman](https://forum.clcboats.com/u/Ken_Klitzman)\
**Post date:** [November 20, 2013, 4:01pm UTC](https://forum.clcboats.com/t/peeler-skiff-flotation-question/41585/8 "2013-11-20T16:01:18Z")

</div>

I think all of the Coast Guard testing CLC had done will pay off. It still blows my mind (5000 lbs in the Peeler and still floating).

---

<div class="post-metadata">

**Author:** ![Chad\_Eiben](https://avatars.discourse-cdn.com/v4/letter/c/3da27b/32.png) [@Chad\_Eiben](https://forum.clcboats.com/u/Chad_Eiben)\
**Post date:** [November 20, 2013, 5:59pm UTC](https://forum.clcboats.com/t/peeler-skiff-flotation-question/41585/9 "2013-11-20T17:59:15Z")

</div>

Hey everyone. &nbsp;Thanks for the replies. &nbsp;I am in Florida. &nbsp;Anyone close by that has a peeler? &nbsp;Haven't bought the kit yet, but will do so hopefully soon. &nbsp;Would like to take a peek at one if possible.

thanks again,

Chad

---

<div class="post-metadata">

**Author:** ![Ken\_Klitzman](https://avatars.discourse-cdn.com/v4/letter/k/85e7bf/32.png) [@Ken\_Klitzman](https://forum.clcboats.com/u/Ken_Klitzman)\
**Post date:** [November 20, 2013, 9:00pm UTC](https://forum.clcboats.com/t/peeler-skiff-flotation-question/41585/10 "2013-11-20T21:00:15Z")

</div>

Where in Florida are you?

---

<div class="post-metadata">

**Author:** ![Chad\_Eiben](https://avatars.discourse-cdn.com/v4/letter/c/3da27b/32.png) [@Chad\_Eiben](https://forum.clcboats.com/u/Chad_Eiben)\
**Post date:** [November 20, 2013, 9:22pm UTC](https://forum.clcboats.com/t/peeler-skiff-flotation-question/41585/11 "2013-11-20T21:22:09Z")

</div>

I live in palm harbor....Tampa...st Pete area.

&nbsp;
