# Rhode Runner - The CLC Runabout **URL:** \ **Category:** Builder's Forum\ **Created:** [April 15, 2021, 10:55am UTC](https://forum.clcboats.com/t/rhode-runner-the-clc-runabout/48519 "2021-04-15T10:55:45Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Julian\_Rosemond](https://avatars.discourse-cdn.com/v4/letter/j/8e7dd6/32.png) [@Julian\_Rosemond](https://forum.clcboats.com/u/Julian_Rosemond)\ **Post date:** [April 15, 2021, 10:55am UTC](https://forum.clcboats.com/t/rhode-runner-the-clc-runabout/48519/1 "2021-04-15T10:55:45Z")
Hello all.  I bravely purchased Rhode Runner - The CLC Runabout kit, knowing all well the last bit of woodworking  I have done was 30 years ago for pine wood derby as a Cub Scout ....had to have it! Has anyone else started, or plans to start building this Pro Kit?   ---
**Author:** ![Tom\_King](https://avatars.discourse-cdn.com/v4/letter/t/f475e1/32.png) [@Tom\_King](https://forum.clcboats.com/u/Tom_King)\ **Post date:** [April 21, 2021, 8:27pm UTC](https://forum.clcboats.com/t/rhode-runner-the-clc-runabout/48519/2 "2021-04-21T20:27:18Z")
I'll be picking up my kit at the end of this month. Let's keep in touch as these projects unfold. ---
**Author:** ![Julian\_Rosemond](https://avatars.discourse-cdn.com/v4/letter/j/8e7dd6/32.png) [@Julian\_Rosemond](https://forum.clcboats.com/u/Julian_Rosemond)\ **Post date:** [April 25, 2021, 11:38am UTC](https://forum.clcboats.com/t/rhode-runner-the-clc-runabout/48519/3 "2021-04-25T11:38:15Z")
   Absolutely! Just FYI in the case that you don't already have this info... the single pallet fit nicely in my standard utility trailer.    100" x 55" x 24"   give or take on the height. 3 boxes of epoxy fit in the back seat.     -JD ---
**Author:** ![Edward\_Stewart1](https://avatars.discourse-cdn.com/v4/letter/e/c4cdca/32.png) [@Edward\_Stewart1](https://forum.clcboats.com/u/Edward_Stewart1)\ **Post date:** [August 29, 2021, 9:30pm UTC](https://forum.clcboats.com/t/rhode-runner-the-clc-runabout/48519/4 "2021-08-29T21:30:41Z")
   Just seeing this post. I have begun working on the Rhode Runner, have the frames done and almost finished puzzle joints. Working slighlty out of order due to space constraints. DJ and Tom, where are you guys located. I'm in San Antonio, TX. I was wondering if any else was working on one of these. Ed