Sand or saw bow and stern on Cheasapeake 16lt?

I am not sure if I should sand the unaligned edges art the bow and stern or use a pull saw. If I use the saw I am afraid I’d lose the factory curve.


Either way, just do what it takes to make the shape smooth and pleasing at some point prior to fiberglassing. Your alignment and joints all look good enought that things should end up looking perfect as you finish shaping - I see no big issues in front of you. Were it me, looks like all you need is sanding - things can go wrong much more quickly using an agressive approach like a saw.

What Jeff said. These are home built boats. No two are exactly the same. Take a breath, don’t rush. Work at it till it pleases your eye. I spend more time with my old bastard file than I do my saw.

Sounds good. Thanks!

agree with sanding as being easier to control in a situation like this…though you will need some agressive grit to make it go reasonably fast. patience, and stopping and checking progress, under either approach will be well rewarded.

for sanding or sawing… i find it helps to scribe a line of the final expected shape with a pencil…to establish a clear goal and keep you oriented and aligned with what you are expecting to acheive.

absent a line, its easy to lose focus and then you step back and go, ‘what the heck did i just do?’

Howard,

Thanks. Again, good advice.

Rob

I use a file and a hand sander and it was easier than I thought. I also rounded the keel and chines. I think enough but I guess when I add the epoxy and wood flour to the gaps I’ll get a better idea.

Looks great! Good job.

Thanks again for your help. The bastard file was the bomb.

Some will argue that their are better tools for all this than a bastard file, BUT, most people already have a bastard file in the tool box and it does pretty darn good.

And it’s so much fun to use a tool whose name makes the church ladies gasp :grinning_face_with_smiling_eyes:

Laszlo

1 Like

Gen X here, I won’t even get into what we used to call wire cutters.

I think I remember my father using the term and my brother and I thought it was hilarious that our Dad used a bad word.

1 Like

Which one, the file or diagonal wire cutters?

Of course, tools don’t get all the fun. Where would sailing be without shocking sailor-talk, specifically that splice made up of a pair of side-by-side long splices?

File. He didn’t tell us about diagonal wire cutters.