# Sanding the weave after first epoxy coat.

**URL:** https://forum.clcboats.com/t/sanding-the-weave-after-first-epoxy-coat/45331
**Category:** Builder's Forum
**Created:** [May 8, 2017, 8:18am UTC](https://forum.clcboats.com/t/sanding-the-weave-after-first-epoxy-coat/45331 "2017-05-08T08:18:06Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![Anthony\_Baracewicz](https://avatars.discourse-cdn.com/v4/letter/a/df705f/32.png) [@Anthony\_Baracewicz](https://forum.clcboats.com/u/Anthony_Baracewicz)
#### Post date: [May 8, 2017, 8:18am UTC](https://forum.clcboats.com/t/sanding-the-weave-after-first-epoxy-coat/45331/1 "2017-05-08T08:18:06Z")

</div>

Sorry bad typing on last message.

On my Passage Maker

After laying down the fibreglass with first expoxy coat what do you use to scuff up the epoxy (&nbsp;getting to the epoxy below weave. ) and not damaging the glass fibres.

I did read scotch pads?