# Skerry CLR?

**URL:** <https://forum.clcboats.com/t/skerry-clr/34543>\
**Category:** Builder's Forum\
**Created:** [September 23, 2008, 5:10pm UTC](https://forum.clcboats.com/t/skerry-clr/34543 "2008-09-23T17:10:04Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kristofer\_Younger](https://avatars.discourse-cdn.com/v4/letter/k/c68b51/32.png) [@Kristofer\_Younger](https://forum.clcboats.com/u/Kristofer_Younger)\
**Post date:** [September 23, 2008, 5:10pm UTC](https://forum.clcboats.com/t/skerry-clr/34543/1 "2008-09-23T17:10:04Z")

</div>

Can I get an estimate of a Skerry's Center of Lateral Resistance from the stem? (yeah, I imagine it moves around a \*bit\* when there are humans aboard)

Would it be somewhat close to the trailing edge of the daggerboard?

cheers,

-Kristofer

---

<div class="post-metadata">

**Author:** ![John\_C\_Harris](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.clcboats.com/john_c_harris/32/760_2.png) [@John\_C\_Harris](https://forum.clcboats.com/u/John_C_Harris)\
**Post date:** [September 26, 2008, 3:34pm UTC](https://forum.clcboats.com/t/skerry-clr/34543/2 "2008-09-26T15:34:22Z")

</div>

##### If you count the skeg---and you should---the Skerry's CLR is a bit aft of the daggerboard.&nbsp;

##### There are byzantine formulae, beloved of armchair sailors,&nbsp;subject to eye-rolling by designers, used to position sails and foils on small craft.&nbsp; The best known is that the CE should be positioned 10% of the waterline length forward of the quarter-chord of the fin.&nbsp; That works pretty well, but only for beamy, shallow-bodied hulls with transoms and prominent fins or centerboards---which describes an awful lot boats.&nbsp; Certainly that's the formula I applied to our small craft that fall under that description:&nbsp; the Passagemaker, Jimmy Skiff, and PocketShip.

##### In my experience, however, narrow double-ended boats don't subscribe to that formula at all, and tend to have pretty neutral helms no matter where the fin is placed, within reason.&nbsp; The Skerry, at least once it's moving, has almost no helm, or just a touch of weather helm, as is desirable.&nbsp; If you calculate the geometric center of area of the whole underbody excluding the rudder fin, you get an 8% lead of CE over CLR.

![Skerry CLR Calc](http://www.clcboats.com/images/photos/CLRCalc.jpg)

---

<div class="post-metadata">

**Author:** ![Kristofer\_Younger](https://avatars.discourse-cdn.com/v4/letter/k/c68b51/32.png) [@Kristofer\_Younger](https://forum.clcboats.com/u/Kristofer_Younger)\
**Post date:** [September 27, 2008, 9:23pm UTC](https://forum.clcboats.com/t/skerry-clr/34543/3 "2008-09-27T21:23:25Z")

</div>

Thanks a lot for the considered reply. I appreciate it. -Kristofer

---

<div class="post-metadata">

**Author:** ![Alan\_Hebert](https://avatars.discourse-cdn.com/v4/letter/a/74df32/32.png) [@Alan\_Hebert](https://forum.clcboats.com/u/Alan_Hebert)\
**Post date:** [September 2, 2015, 7:35pm UTC](https://forum.clcboats.com/t/skerry-clr/34543/4 "2015-09-02T19:35:14Z")

</div>

&nbsp; &nbsp;In my experience it moves around a LOT, depending on where I sit. &nbsp; The CLR of the hull is probably awfully close to the calculated point if the boat is settled in exactly on its designed waterline, and balanced exactly for and aft. &nbsp; Put 130 pounds of person in a position to knnock it out of exact fore-and-aft trim, and where the functional CLR is, can change wildly.

This is known by all dingy racing sailors. &nbsp;You can almost steer a performance dinghy with your weight, if the conditions aren't too extreme.  
  
Add ing this together with Johns &nbsp;observation that the long, narrow double-ender hull is awfully forgiving on fin/foil placement and I'd hazard a guess that folks are over-stressing about where the \*Exact\* placement of the mast and boom and CE of the sailplan are. 3-4 inches one way or another isn't really going to matter much, and even if it does, then just sit a couple of inches for or aft to compensate for it.

&nbsp;
