# Skerry Floorboards

**URL:** <https://forum.clcboats.com/t/skerry-floorboards/34418>\
**Category:** Builder's Forum\
**Created:** [August 24, 2008, 11:34pm UTC](https://forum.clcboats.com/t/skerry-floorboards/34418 "2008-08-24T23:34:37Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bob\_Heinrich](https://avatars.discourse-cdn.com/v4/letter/b/e0b2c6/32.png) [@Bob\_Heinrich](https://forum.clcboats.com/u/Bob_Heinrich)\
**Post date:** [August 24, 2008, 11:34pm UTC](https://forum.clcboats.com/t/skerry-floorboards/34418/1 "2008-08-24T23:34:37Z")

</div>

I found a website featuring a Skerry builder's design for floorboards and found them to be a worthy consideration for installing in my present in-process Skerry.&nbsp; My question is, does anyone have any experience with this innovation and I guess, for John, does it compromise his original design of the Skerry in terms of the boat's evolution?

The floorboards look like a nice feature and I wonder about the availability of a kit to build them because I simply don't have the experience, skills, or equipment to cut a piece of wood straight without instruction.&nbsp; This is my first try at building a boat and that's why we did the Skerry in the course setting.&nbsp; We're doing just fine though and can't wait to get her launched.&nbsp; Maybe the end of September, we'll see.

Comments on the floorboards welcomed.&nbsp; Best, Bob

---

<div class="post-metadata">

**Author:** ![George\_Krewson](https://avatars.discourse-cdn.com/v4/letter/g/9d8465/32.png) [@George\_Krewson](https://forum.clcboats.com/u/George_Krewson)\
**Post date:** [August 25, 2008, 2:02pm UTC](https://forum.clcboats.com/t/skerry-floorboards/34418/2 "2008-08-25T14:02:13Z")

</div>

Bob,

I sailed Mike Delchambers Skerry last year in Texas and he has the floorboards in it. I will definitely do the same when I build mine. It&nbsp;might raise the center of gravity a few inches but there were no ill effects on sailing at all. If you get a bit of water in the boat you're not sitting in it. As far as building them, I know there's a guy who sells plans on the Skerry forum and you could probably find somebody with some woodworking skills to help you out.

Post pics when you get her launched!

George K

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex007/uploads/clc/original/1X/cf22079d59704e5c3cf9240fe53ff8dd2757dabb.png) [@system](https://forum.clcboats.com/u/system)\
**Post date:** [August 25, 2008, 3:35pm UTC](https://forum.clcboats.com/t/skerry-floorboards/34418/3 "2008-08-25T15:35:43Z")

</div>

When I built my Skerry I intended to add floorboards in case water came in and also it adds a significant wow factor.

Now that I have a summer of sailing under all kinds of weather, getting wet with water coming in is a non-issue. My skerry has been consistantly bone dry even in wicked wind.

Also I have found that on a few occasions I have had to move very fast sitting on the floor and sliding to a better balance position. I think that floorboards would have hindered me.

&nbsp;

---

<div class="post-metadata">

**Author:** ![Bob\_Heinrich](https://avatars.discourse-cdn.com/v4/letter/b/e0b2c6/32.png) [@Bob\_Heinrich](https://forum.clcboats.com/u/Bob_Heinrich)\
**Post date:** [August 25, 2008, 7:44pm UTC](https://forum.clcboats.com/t/skerry-floorboards/34418/4 "2008-08-25T19:44:31Z")

</div>

George and Monday, thanks for your comments.&nbsp; Two excellent points and I’ll consider both.&nbsp; The wow factor is an important consideration but extra weight the not-getting-wet factond&nbsp;are equally important.&nbsp; Wonder what John thinks?&nbsp; Thanks folks.&nbsp; Bob

---

<div class="post-metadata">

**Author:** ![Julie\_Kanarr](https://avatars.discourse-cdn.com/v4/letter/j/dc4da7/32.png) [@Julie\_Kanarr](https://forum.clcboats.com/u/Julie_Kanarr)\
**Post date:** [August 25, 2008, 10:23pm UTC](https://forum.clcboats.com/t/skerry-floorboards/34418/5 "2008-08-25T22:23:25Z")

</div>

I launch off the beach a lot... and&nbsp;keep a&nbsp;sponge & bucket&nbsp;in the boat&nbsp;to absorb the water....as well as wearing&nbsp;nylon pants or shorts, so&nbsp;getting wet doesn't matter. &nbsp;I've also considered floorboards, but thus far&nbsp;have chosen not to include them.... and, thus far, am happy not to have them. It seems that, in light air,&nbsp;I&nbsp;often end up kneeling&nbsp;while sailing my skerry (okay, it's named Sanctuary, so it's an appropriate posture)... it's a posture that makes it possible to shift my weight quickly, and it also enables me to have a good forward view (helpful when there&nbsp;is other marine traffic) and&nbsp;the thought of kneeling on slotted floorboards makes me cringe.

I've&nbsp;also got three&nbsp;"crazy creek"&nbsp;chairs (the kind that&nbsp;will flop&nbsp;out flat,&nbsp;and&nbsp;employ&nbsp;webbing/buckles to form them into a seat). I use "mine" in the flat position -- either on the center seat when rowing (provides mild, yet sufficient&nbsp;cushioning, and covers the daggerboard trunk slot), or&nbsp;in the cockpit under me (either sitting or kneeling) when sailing. The other two are for my passengers (when applicable)--- who report great comfort from sitting on them in the "chair form" in the fore/aft seats while enjoying their "Cleopatra moments." The chairs are also handy as padding&nbsp;between the sail rig/oars and the seats&nbsp;while trailering...so all three come on every trip, but&nbsp;one or two might be left behind in the car, depending on how many passengers I've got.

Julie K.
