# Varnish

**URL:** <https://forum.clcboats.com/t/varnish/42872>\
**Category:** Builder's Forum\
**Created:** [February 19, 2015, 6:40pm UTC](https://forum.clcboats.com/t/varnish/42872 "2015-02-19T18:40:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Henry\_Wing](https://avatars.discourse-cdn.com/v4/letter/h/bbce88/32.png) [@Henry\_Wing](https://forum.clcboats.com/u/Henry_Wing)\
**Post date:** [February 19, 2015, 6:40pm UTC](https://forum.clcboats.com/t/varnish/42872/1 "2015-02-19T18:40:43Z")

</div>

I have a can of Interlux Schooner varnish about 2/3's full. I make it a habit to spray some nitrogen into a paint/varnish cab before sealing it and that usually keeps a skin from forming on top so the next time I open it all it needs is to be stirred. Anyhow, this can of varnish. I poured it through a filter made for that purpose and found a "blob" of gelled varnish remaining in the filter. I've tried to mix it and it doesn't seem to want to mix. &nbsp;Should I just throw the gelled part out or the whole can or keep mixing? &nbsp;I hate to throw it away if it's usuable.&nbsp;

---

<div class="post-metadata">

**Author:** ![Jp\_Prins](https://avatars.discourse-cdn.com/v4/letter/j/ad7895/32.png) [@Jp\_Prins](https://forum.clcboats.com/u/Jp_Prins)\
**Post date:** [February 19, 2015, 7:18pm UTC](https://forum.clcboats.com/t/varnish/42872/2 "2015-02-19T19:18:03Z")

</div>

&nbsp;&nbsp;&nbsp;

Personally, since varnish is near the end of the finish on bright work I would discard it and get a new can. . . However. . . If it is less than three years old, looks right and smells right you could do a dry test to determine if it is okay to use.

Spread a little on a piece of glass tilt it at a 45 degree angle and let it dry overnight. If it dries hard overnight on the glass you are good to go.&nbsp; I usually thin my first few coats by 15 to 20 percent and mid coats at around 10 percent before I go for a slightly thicker finish coats that gets buffed. If it passes the dry test and looks good I think you would be fine to thin it an use it.

&nbsp;

JP
