# West and Mas epoxy together ?

**URL:** <https://forum.clcboats.com/t/west-and-mas-epoxy-together/39878>\
**Category:** Builder's Forum\
**Created:** [July 14, 2012, 9:16pm UTC](https://forum.clcboats.com/t/west-and-mas-epoxy-together/39878 "2012-07-14T21:16:25Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Will\_Mccue1](https://avatars.discourse-cdn.com/v4/letter/w/7ea924/32.png) [@Will\_Mccue1](https://forum.clcboats.com/u/Will_Mccue1)\
**Post date:** [July 14, 2012, 9:16pm UTC](https://forum.clcboats.com/t/west-and-mas-epoxy-together/39878/1 "2012-07-14T21:16:25Z")

</div>

We got half way through epoxying our NE dory today when we ran out of epoxy. &nbsp;Does anyone have experience putting west 105/207 on top of curing Mas? &nbsp;Anything I should be worried about?

---

<div class="post-metadata">

**Author:** ![Chad\_Mcneely](https://avatars.discourse-cdn.com/v4/letter/c/ecae2f/32.png) [@Chad\_Mcneely](https://forum.clcboats.com/u/Chad_Mcneely)\
**Post date:** [July 14, 2012, 9:54pm UTC](https://forum.clcboats.com/t/west-and-mas-epoxy-together/39878/2 "2012-07-14T21:54:11Z")

</div>

No problem.

You can even combine epoxy brands in one pot, if you first mix each with its own hardener separately. Or apply a sealer coat of brand A followed by fillets of brand B followed by tabbing wet out with brand C, all wet on wet or at least wet on green. After a layer cures, it doesn't matter at all what the underlying brand is, so long as appropriate prep is done- wash away blush and abrade the surface, etc.&nbsp;

Within the West family, you can also combine different lines, such as adding a dash of their 5 minute "G5" to a batch of laminating resin for a quicker cure, etc. Each resin at its own correct ratio with hardener of course...