# wood duck 10 forms alignment

**URL:** <https://forum.clcboats.com/t/wood-duck-10-forms-alignment/39745>\
**Category:** Builder's Forum\
**Created:** [June 9, 2012, 3:17pm UTC](https://forum.clcboats.com/t/wood-duck-10-forms-alignment/39745 "2012-06-09T15:17:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mark\_Canty](https://avatars.discourse-cdn.com/v4/letter/m/bc8723/32.png) [@Mark\_Canty](https://forum.clcboats.com/u/Mark_Canty)\
**Post date:** [June 9, 2012, 3:17pm UTC](https://forum.clcboats.com/t/wood-duck-10-forms-alignment/39745/1 "2012-06-09T15:17:46Z")

</div>

I am stitching together my first wood duck 10 from full size plans. I am finding that the lines for the temporary form 8.5 and bulkhead don't line up correctly from the side and bottom panels. I went back and measured back from the plans bow to the temporary form to check the provided lines on the plans and get 37 13/16" on the side panel and 38 1/8" on the bottom. I think it might be a plan error, but thought I would see if anyone else has seen this problem or if maybe has encountered the same thing and it is my error instead. The from 1.5 looks right. I figure I will just make the form stand up straight and drill new holes. Any comments would be appreciated.

Macklin

---

<div class="post-metadata">

**Author:** ![Mark\_Canty](https://avatars.discourse-cdn.com/v4/letter/m/bc8723/32.png) [@Mark\_Canty](https://forum.clcboats.com/u/Mark_Canty)\
**Post date:** [June 9, 2012, 3:20pm UTC](https://forum.clcboats.com/t/wood-duck-10-forms-alignment/39745/2 "2012-06-09T15:20:22Z")

</div>

CORRECTION FORMS 3 AND 7 in the middle.

Macklin