# Yet Another Epoxy Question

**URL:** <https://forum.clcboats.com/t/yet-another-epoxy-question/35290>\
**Category:** Builder's Forum\
**Created:** [May 29, 2009, 11:38pm UTC](https://forum.clcboats.com/t/yet-another-epoxy-question/35290 "2009-05-29T23:38:51Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bob\_Heinrich](https://avatars.discourse-cdn.com/v4/letter/b/e0b2c6/32.png) [@Bob\_Heinrich](https://forum.clcboats.com/u/Bob_Heinrich)\
**Post date:** [May 29, 2009, 11:38pm UTC](https://forum.clcboats.com/t/yet-another-epoxy-question/35290/1 "2009-05-29T23:38:51Z")

</div>

Folks, last year at the '08 Okume Festival workshops at CLC in Annapolis, I won an MAS epoxy kit of Flag and Hardner.&nbsp; I was just getting ready to build a Skerry, my first boat.&nbsp; The kit was never used because I never knew what Flag was vs. Resin.&nbsp; Now in another project (the RC Independence), a much smaller boat&nbsp; 🙂 I wonder if I can substitute Flag for Resin in its construction if needed,&nbsp;if I run out of Resin for the completion of the kit?&nbsp; The Flag and Hardner kit seems to be for quick repairs to an epoxied boat, but I don’t know enough about epoxies to know if the two can even be applied over coats of the other.&nbsp;&nbsp; Would appreciate any suggestions as to the use of this Flag and Hardner combination vs the Resin and Hardner mix, given that they are both two to one ratios.&nbsp; Thanks!&nbsp; Best,&nbsp; Bob H\>

---

<div class="post-metadata">

**Author:** ![Robert\_Hancock](https://avatars.discourse-cdn.com/v4/letter/r/67e7ee/32.png) [@Robert\_Hancock](https://forum.clcboats.com/u/Robert_Hancock)\
**Post date:** [May 30, 2009, 4:51am UTC](https://forum.clcboats.com/t/yet-another-epoxy-question/35290/2 "2009-05-30T04:51:28Z")

</div>

I havent heard of FLAG before so I had a look at the MAS website. You should find your answers there

.http://www.masepoxies.co.uk/5.asp

Robert

---

<div class="post-metadata">

**Author:** ![Bob\_Heinrich](https://avatars.discourse-cdn.com/v4/letter/b/e0b2c6/32.png) [@Bob\_Heinrich](https://forum.clcboats.com/u/Bob_Heinrich)\
**Post date:** [June 1, 2009, 5:29pm UTC](https://forum.clcboats.com/t/yet-another-epoxy-question/35290/3 "2009-06-01T17:29:25Z")

</div>

Thanks Robert for your post.&nbsp; I guess I shoulda’ been smart enough to figure that out for myself…duh!&nbsp; best,&nbsp; bob