Shearwater Sport Cockpit Forms

Builder's Forum
1

I'm working on the cockpit forms and things seem off.  See the photos below.  The forms do not fit the sides of the boat and the center form sits about 1/4" proud of the bulkhead and form 6.  Not sure if I should shave down the center form so its flush.  Also not sure if I should shape the sides of form 6 so it aligns with the shear clamps and side panels.  Any suggestions?

I'm doing a Shearwater 14 hybrid next to it and everything on it fit just right.

2

Not sure why original photos did not load.

3

I had the same problems on a hybrid sport. I used a strip to make sure the lines were fair, and had to push some of the forms down quite firmly. I'll post some pictures when I get back. 

4

When I did my SW Sport Hybrid I moved the forms forward and back as needed to get a fair line on the deck, and had a good height in relationship to the shear clamp.