Working on my WD12 and I've completed the fillets & taping on the interior hull and deck. Plans now call for a second coat of epoxy. Do I sand between these coats, or is that overkill?
I followed this after making the mistake of sanding between coats for no reason and it worked well
https://www.clcboats.com/shoptips/epoxy_and_fiberglass/epoxy_faq.html
- What is the recoat time? - Since epoxies from CLC are 100% solid (no solvent), recoat time can be as short as surface tack. If more than 30 hours pass between coats, we recommend a light scuff sand. Always check for blush on surfaces.